Rubberall Aluminium Termination Bar 3.1mtrs/10ft length is intended for attaching and sealing flashing termination as outlined in the Installation Manual. This is extremely effective when applying a Rubberall EPDM membrane next to an adjoining material, such as, asphalt roofing. You must ensure that the are free from dust, dirt, oil, water and other contaminants. Wall areas above the Termination Bar must be waterproof. Apply Rubberall Water Cut-Off Mastic between the substrate and flashing directly under where the Termination Bar is to be installed. Anchor bar through each pre-punched hole. Remove excess flashing material above termination bar.