Premium Grade 9" Uncured Flashing with Tape / Lin metre

Premium Grade Rubberall 9" Uncured Flashing with Tape is specifically designed to form around awkward features, pipes, penetrations and drain outlets and any other feature where the ability to stretch and form the material is required such as returning as a water sealing upstand against an adjoining wall.

The Premium Grade Rubberall 9" Uncured Flashing with Tape is available by Linear meter or in a 15.24m Roll 

Also available in:- 

6" x 30.48L/mtr Roll or per L/mtr

12" x 15.24L/mtr Roll or by L/mtr

How to use:-

The Rubberall EPDM membrane and adjoining surfaces receiving the Premium Grade Rubberall Uncured Flashing must be clean, dry, and free from dust and dirt. Wherever uncured flashing tapes are to be used the surface must be primed with Premium Grade Rubberall Seam Tape Primer Plus and allowed to dry to touch. then adhere to Flashing Tape to the primed surface.

General: This product usually has increaded adhesion value when aged.

• Elevated temperature usually encountered in single ply roof installations will cause the product to cure tighter, therefore, developing the increased test values due to the cross-linking that occurs during extrusion and thereafter, the product benefits.
• It's Labour saving
• Superior performance over the full range of environmental conditions
• Quick tack from high to low temperature
• Resists tearing, cracking and abrasion in all weather conditions